|
This model is a fully automatic pre-cut hot melt adhesive spray labeling machine, suitable for mineral water, beverages, condiments, alcohol, daily chemical and other industries. The machine has the advantages of less glue consumption, low label loss rate, large labeling length and high labeling accuracy. Power supply: AC380V 50/60Hz 20KW Labeling station: 18 stations (temporary station according to the product picture provided by the customer) Speed adjustment method: stepless speed change Bottle diameter: ¡Ó30-118mm round, oval container Bottle height: 80-300mm Maximum height of the label: 210mm Label core size: inner diameter ¡Ó 152.4mm outer diameter ¡Ó 550mm Colloid type: Special hot melt adhesive, sizing at both ends of the label Melt temperature: 120-160 ¡ã C Type of stickers: Plastic bottles, glass bottles, metal bottles, etc., which are round, square, flat, oval bottles (refer to the shape of the labeling position, and the shape of the labeling position should be the same) Label type: OPP film, pearl film, paper-plastic composite film, paper label Label thickness: Must be greater than 0.035mm Air source requirements: 3-5Kg 30L/min Machine size: L3000¡ÁW2600¡ÁH2100mm Machine weight: about 3500kg
|
